Vertical Single Cylinde Diesel Generator 5KW Overload Protection Capability

Features:

1. Strong power, all ring power diesel generators are equipped with a strong self-developed four stroke engine automatic pressure reducing mechanism to ensure fast start.

2. Low noise, efficient combustion system to ensure complete combustion, effectively reduce the noise of the engine. In addition, the noise of the unit is greatly reduced by the double-layer noise reduction structure of the integrated shell and the inner lining of silent unit and the large-scale attenuator device.

3. The low oil pressure alarm device will automatically shut down the motor set when the oil pressure drops to the safety warning line, and can not start normally until the oil is replenished, so as to avoid damage to the unit.

4. The new automatic voltage regulator (AVR) can reduce the voltage fluctuation to a lower limit and ensure a more stable unit output.

5. Overload protection capacity: when the unit is over 110% overload, the unit will automatically protect the unit from overload damage.(optional)

6. All control units are centralized on the intelligent control panel, and users can know the real-time operation conditions of the unit, so that the users have no worries.(optional)

7. Humanized design and appearance improvement of Huanneng power generator set inject more humanized design ideas. Most models are equipped with casters, which is convenient for unit movement.

Working Principle:

The diesel engine drives the generator and converts the energy of the diesel into electricity.

In the cylinder of the diesel engine, the clean air filtered by the air filter and the high-pressure atomized diesel fuel injected by the fuel injector are fully mixed. Under the upward extrusion of the piston, the volume shrinks and the temperature rises rapidly, reaching the ignition point of the diesel. The diesel fuel is ignited, the mixed gas burns violently, the volume expands rapidly, and the piston is pushed down, which is called 'work'. Each cylinder performs work in a certain order, and the thrust acting on the piston becomes the force that pushes the crankshaft to rotate through the connecting rod, thereby driving the crankshaft to rotate.

Testing Items of Power Friend Genset:
1) Parts fault testing
2) Fue tank pressure testing
3) Bolt tightening torque testing
4) Painting thickness testing
5) Voltage bearing and insultion testing
6) Noise testing
7) Loading testing: All qualified generator sets are subjected to a comprehensive performance test which inclides 0% load, 25% load, 50% load, 75% load, 100% load and 110% load and to check, verify that all control systems, alarm and shut-own protection.

Technical parameters:

Product picture: